Original and equivalent industrial components for power generation, mining and heavy industry. Don't see it? We source it.
A quick engineering guide. Tell us the service and we'll quote the right valve, original or equivalent.
Quarter-turn valve with a bored ball that gives fast, leak-tight shut-off.
Linear isolation valve whose gate lifts clear of the bore for full flow.
Linear control valve with plug and seat that throttles precisely.
Compact quarter-turn disc valve, light and economical for large diameters.
Automatic valve that allows flow in one direction only and stops backflow.
Fine-threaded plug valve for precise, low-flow regulation.
Actuated valve that modulates flow in response to a control signal.
Uses a flexible membrane to isolate or throttle, away from moving parts.
Quarter-turn tapered or cylindrical plug for quick shut-off, multi-port.
Self-acting valve that lowers and holds downstream pressure at a setpoint.
Opens automatically at a set pressure to relieve overpressure.
Gate with a sharp edge that cuts through thick media for isolation.
Closes by pinching a flexible sleeve, with no metal in the flow path.
Check valve with strainer at a pump suction to retain prime and block debris.
Removes solid debris to protect pumps, meters and downstream valves.
Provides a clear visual check of flow, level or media condition.
The rest of what we supply, organized so you can quote a complete package from one source.
Line pipe and tubing in the grades and schedules your project calls for.
Seamless and ERW · ASTM A53 / A106 · schedules 40 to XXS.
304 / 304L and 316 / 316L · seamless and welded · sanitary tubing.
Chrome-moly (A335) and low-temperature carbon steel (A333).
Black, galvanized, beveled or threaded ends, in the lengths you need.
Flexible connectors that absorb thermal movement, vibration and misalignment.
Absorb compression and extension along the pipe axis between two fixed points.
Tie-rod units that take perpendicular offset and contain pressure thrust.
Twin-bellows units that absorb axial, lateral and angular movement at once.
Spool-type rubber bellows for water, slurry and pump connections.
Multi-layer fabric joints for ducting, exhaust and flue gas.
Stainless circular or rectangular bellows for steam and high temperature; CE-marked.
Full hardware and sealing line in carbon, alloy, stainless and mil-spec grades.
Hex & cap, structural, flange, carriage, U-bolts and eyebolts.
Machine, self-tapping, socket, lag, concrete and sheet-metal.
Hex, heavy hex, lock, flange, coupling, wing and acorn.
Flat, lock, fender, structural and bonded sealing washers.
All-thread rod, studs, wedge, sleeve and drop-in anchors.
Gaskets, gasket material, isolation kits and bolt / stud sets.
Polyethylene pipe, fusion fittings and equipment for water, gas, mining and geothermal lines.
IPS and DIPS sizing, DR7 to DR17 pressure ratings, for water, gas and slurry.
Elbows, tees, reducers, crosses and flange adapters, DR11 / DR17.
Couplings, branch saddles, tapping tees and reducers, 160 / 230 psi.
Butt, socket and electrofusion machines, tools and accessories.
The connecting and sealing components that tie your system together, to ASME / ASTM standards.
Elbows, tees, reducers, caps, crosses and stub ends. Carbon A234 WPB and stainless A403, ASME B16.9.
3000–9000 lb forged elbows, tees, couplings, unions, reducers, plugs and bushings.
Weld-neck, slip-on, blind, socket weld, threaded and lap-joint; classes 150 to 2500, ASME B16.5.
Pipe nipples, swage nipples and branch outlets (weldolet, threadolet, sockolet).
Gauges, strainers, sight glasses and flow components for monitoring and protection.
Brands and equivalents sourced on request · OEM and aftermarket
Send us the spec or the part number. You will get a clear quote, fast.